Mellow wax is formulated from a traditional recipe, developed from over ninety years experience in the manufacture of fine woodfinishes. A blended beeswax polish of the highest quality, this mellow wax polish is available in 3 distinctive wood shades, and have been successfully used for finishing sealed or previously polished wood for nearly a generation. For use on previously finished or sealed wood. Ensure all surfaces are free from dust or blemishes before application of mellow wax polish. Take a clean cotton cloth, sponge or brush and apply in the direction of the wood grain where possible. To obtain a uniform colour, always wipe evenly, blending the mellow wax over the whole surface area by exerting a small degree of pressure when applying by hand. Take care to lightly remove any excess mellow wax immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern. Leave to dry for around 10 minutes, and buff to finish with a soft cloth. The application of additional coats will deepen the existing colour or shade and significantly enhance the resulting sheen level.